Pics of your York Compressor setup!!!

TopShelf84 · Post by **TopShelf84** » Tue Jan 28, 2014 7:47 pm

I'm getting ready to install a York compressor in my CJ7. I'm sure y'all have some on your rigs out there. I'd appreciate any info that you may suggest before my install. I've done my research, so I think that i know how to install it. I'm just wanting to get some ideas for mounting and possibly any clean plumbing ideas.

dex3361 · Post by **dex3361** » Tue Jan 28, 2014 9:27 pm

What did you pull your York compressor out of? I have been thinking of this to my YJ.

TopShelf84 · Post by **TopShelf84** » Tue Jan 28, 2014 11:54 pm

Early 80's Wagoneer with a 360..

Cowboy80CJ5 · Post by **Cowboy80CJ5** » Wed Jan 29, 2014 8:57 am

TopShelf84 wrote:I'm getting ready to install a York compressor in my CJ7. I'm sure y'all have some on your rigs out there. I'd appreciate any info that you may suggest before my install. I've done my research, so I think that i know how to install it. I'm just wanting to get some ideas for mounting and possibly any clean plumbing ideas.

It will never work. I have never seen anyone that was able to pull this off, and actually have a working unit. Good grief......I bet next you will be wanting to do something stupid like using your bumpers as air tank. :snooty:

TopShelf84 · Post by **TopShelf84** » Wed Jan 29, 2014 11:33 am

No intentions of using the bumper, but I believe that industrial balloons tied to the roll cage would work the best

Do you have any pics of your old setup handy Josh?

Steveakus · Post by **Steveakus** » Wed Jan 29, 2014 5:35 pm

I always just pull a spark plug out and screw in an air hose, rev that B!tch up :bigthumb:

TopShelf84 · Post by **TopShelf84** » Wed Jan 29, 2014 6:44 pm

Will a Bosche plug work?!? lol :naughty:

jopickens · Post by **jopickens** » Wed Jan 29, 2014 8:28 pm

Sheesh... Just hook a hose up to your exhaust...

jperry7783 · Post by **jperry7783** » Wed Jan 29, 2014 8:47 pm

^ I misread that. Looking at the picture I thought it said ho's.

TopShelf84 · Post by **TopShelf84** » Wed Jan 29, 2014 9:47 pm

jperry7783 wrote:^ I misread that. Looking at the picture I thought it said ho's.

Sign me up!! :bigthumb:

Shaun · Post by **Shaun** » Wed Jan 29, 2014 9:55 pm

Lol. Nice.

highlandercj-7 · Post by **highlandercj-7** » Wed Jan 29, 2014 10:42 pm

What engine is in uour seven? I used the oem waggy york brackets and all as it is on the waggy. If you run a 4.0 or 258 there are factory brackets to run a york on. Eagles had them alot.

Big Jeff · Post by **Big Jeff** » Thu Jan 30, 2014 2:27 pm

Warn OBA just stuff it behind the rear seat and it provides every thing you need a @$450

TopShelf84 · Post by **TopShelf84** » Thu Jan 30, 2014 11:03 pm

highlandercj-7 wrote:What engine is in uour seven? I used the oem waggy york brackets and all as it is on the waggy. If you run a 4.0 or 258 there are factory brackets to run a york on. Eagles had them alot.

Thanks, it never really crossed my mind to check an old Eagle. I pulled a harmonic balancer off one I can go check it to see about the bracket. I have the 258 in it. Thanks for the input!!

TopShelf84 · Post by **TopShelf84** » Thu Jan 30, 2014 11:04 pm

Big Jeff wrote:Warn OBA just stuff it behind the rear seat and it provides every thing you need a @$450

Little tight on cash for that kind of setup. College student(wife's a teacher), and a 4 month old. Thanks though..

West Virginia Jeep Club Forum Archive